Product Description:
1. Product Introduction：ECT-XP-001 is used to remove surface dirt, ink, dust particles, and metal particles from various chips.
Note:Cannot be diluted, must be the original solution
2. Product features:Efficient Cleaning: Rapidly removes oil stains, rust, stubborn residues, and other impurities from material surfaces, ensuring the proper functioning of equipment and enhancing production efficiency.
Not damaging the chip, effectively improving the chip yield rate
3. Product data:
Application areas: Suitable for various applications such as brass and purple copper.
Cleaning process: ultrasonic cleaning.
Cleaning contaminants: Surface degreasing of chips for oil, dust, ink, and metal particles.
Product Technology: New Functional Material ECT and Composite Surfactant Technology
Recommended Concentration: 100%
Usage Instructions:
1. Pour the semi water-based ink cleaner into the container.
2. The components should be placed in the container, and the surface of the cleaning agent should be higher than the components.
3. Place the container into the ultrasonic equipment and start ultrasonic cleaning for 10-20 minutes (the time depends on the actual situation)
4. When a certain effect is achieved, stop the ultrasonic equipment and take out the container and cleaned parts.
5. Rinse the cleaned parts thoroughly with clean water, completing all cleaning steps.
Product packaging, storage, and transportation:
Plastic drum packaging: 10KG, 20KG, 25KG/drum, non hazardous materials are easy to store and transport;
The storage period is two years, and it cannot be stored outdoors to prevent exposure to sunlight and rain;
Unused cleaning agents must have the lid tightened to prevent moisture and impurities from entering.
