Copper cleaning agent

1. Product Introduction：ECT-TQ-001 Copper-Specific Cleaning Agent is formulated with surfactants, penetrants, auxiliary agents, and deionized water. Designed for copper workpieces, it effectively removes grease, wax, and oxide layers while preventing oxidation. Compared to similar cleaning products, it demonstrates superior degreasing and decontamination capabilities without oil recontamination. This labor-efficient solution enhances surface brightness, preserves substrate integrity, and facilitates easy rinsing with zero residue. Notably, it significantly improves workpiece surface gloss, delivering exceptional cleaning performance.

2. Product features:

Efficient Cleaning: Rapidly removes oil stains, rust, stubborn residues, and other impurities from material surfaces, ensuring the proper functioning of equipment and enhancing production efficiency.

Not damaging the chip, effectively improving the chip yield rate.

3. Product data:
Application areas: Suitable for cleaning machining oil stains, wax residues, and oxides from various copper workpieces.
Cleaning process: Soaking or ultrasonic cleaning
Product Technology: New Functional Material ECT and Composite Surfactant Technology

Recommended Concentration: Dilute with water at a ratio of 5-10:1 and perform ultrasonic cleaning for 5 minutes.For heavy rust, dilute at 3-5:1 and perform ultrasonic cleaning for 10-15 minutes.
Usage Instructions: 

1.Purpose: Suitable for cleaning oil stains, wax residues, and oxides during the processing of various copper workpieces. Pour the copper cleaning agent into a container and dilute it 5 to 10 times with purified water.

2. Components should be placed in containers, and the surface of the cleaning agent should be higher than the components.

3. Ultrasound for 5-10 minutes (depending on the actual situation)

After achieving a certain effect, remove the components from the container.

4. Rinse the parts thoroughly with clean water and complete all cleaning steps.

Product packaging, storage, and transportation:

Plastic drum packaging: 10KG, 20KG, 25KG/drum, non hazardous materials are easy to store and transport;

The storage period is two years and cannot be stored outdoors to prevent exposure to sunlight and rain;

Unused cleaning agents must have their lids tightened to prevent moisture and impurities from entering.